Deck - Week 6

Picture frame completed

Once again Saturday brought rain. Fortunately it was only intermittent showers so I was able to get some work done. I laid out the locations for the railing posts and finished the outside edge of the picture frame boards. I also added another joist to provide a place to attach the board that runs up the center of the deck.

Starting to look like a real deck

Sunday's weather was beautiful (seems like a trend that's going to continue next week-end). I got half the deck planked. The CorectDeck CX is really easy to work with, but because of the picture frame, every board is custom fit and time consuming. Next week should go a bit faster as I'll have the saw on the completed part of the deck so there will be a lot less up and down the stairs.

Deck - Week 5

Miter saw setup

It rained all day Saturday so not much was accomplished. Actually, it pretty much rained all week putting a serious damper in any progress. I manged to get a tarp setup underneath the deck to protect the new saw while I cut stair planks. I got a few stairs installed before the rain became too miserable to continue.

A few stairs done

I'm using vinyl trim for the stair risers to match the railing. It didn't rain Sunday so I was able to get all the stairs done plus the framing for the step off the kitchen door. I broke 3 T15 bits while screwing down the CorectDeck CX decking. That stuff is crazy dense. So it was off to HomeDespot to get more T15 bits and a new set of drill bits and a quick release adapter. My new 12" sliding compound miter saw is working well. Kerry said Merry Xmas, Happy, Birthday, Merry Xmas, Happy, Birthday, Merry Xmas, Happy, Birthday, etc. for the next few years for that one. The weather is supposed to be good this week, so I should finish the blocking and kitchen sliding glass door step and be able to get started on the picture frame before the weekend. Forcast is showing rain for Saturday again... Blah.

Deck - Week 4

First 8 joists in place

On Thursday I took a vacation day to get a headstart on the deck before the weekend. I managed to put in 8 16 foot joists by myself. It was slow but satisfying.

First 8 joists as seen from above

All joists and ends done; stair stringers set up

On Saturday, the wife's friend, Tim came over to lend a hand for the day. Dad came for another weekend of hard labor. We managed to get all the joists up and also setup two of the stairway stringers. After Tim left in the afternoon we poured the concrete footers for the stair-posts.

Stair stringers

Stair posts set in place and center-line stringer added

On Sunday Dad and I added the center-line stair stringer and set the stair posts in concrete. We also bolted the face boards on and bolted the tops of the stringers to the joists.

Beam-ends trimmed

Also on Sunday we trimmed the ends of the beams. This week I'll finish fastening various bits that are only temporarily tacked in place. I'll try to finish the blocking for the picture frame deck boards and build the step from the sliding-glass door. The deck has been a great excuse to accumulate more toys. The latest is the 12" sliding compound miter saw that will be used extensively for cutting the decking which will be laid on a 45 degree angle.

Deck - Week 3

First beam clamped in place

On Saturday I was able to put up the last post and use a couple of straps to locate and level the first beam. I cut the post notches with a chainsaw which made a mess and turned out pretty uneven and very rough. I told the wife I needed a new toy and ran out Sunday morning to buy a reciprocating "Sawsall." I was also able to complete the flashing on the ledger boards and put in the last few bolts securing them to the house. Also Saturday I put up the rim joist so I could locate the outside edge of the beams which would go up Sunday.

Three beams in place

Sunday, thanks to JTB and his son I was able to get all three beams bolted to the posts. The new saw greatly helped the effort and made the cuts much cleaner and neater than the chainsaw. We also managed to get the center-line double joist square to the house and use that as a reference for squaring up the rim joist and a couple of other key joists. Next: joists and more joists, blocking for the picture-frame deck boards trimming the beam ends and possibly adding the stair posts and framing.